How to Use DMC Catalyst to Produce Polyether Polyols？
The DMC catalyst is double metal cyanide catalyst. Compared with similar polyols made using basic(e.g., KOH)catalysts, polyether polyols made from the catalyst have low unsaturations, narrow molecular weight distributions, have high molecular weight, and are useful in making a variety of polyurethane products. DMC catalyst is highly active in epoxide polymerization reactions used to prepare polyether polyols.
We can yield the DMC more than 20000 kg within one year, and thus afford to produce 50～70 ten thousand tons of polyols. This catalyst is white or light yellow powder, is suitable for preparation of polyols with 1~6 functions. Compared with basic catalysts, this catalyst can be used with less amount (30ppm), and reaction time of polymerization is reduced largely, and the polyols products are not necessary to be refined. The DMC is suitable for using in common epoxide polymerization reactors, but it can be better if reactors have both of stirring and cycling systems.
When using the DMC production period is short, thus the costs for production are reduced while the property of products are advanced.
Conditions wanted for initiators
1. polyethers with 1～3 0r more hydroxyl groups 2. molecular weight:for at least 2 hydroxyl groups---350~1000; for monols---with boiling point more than l00℃ 3. ∑Mn+ (mainly for K、Naions)≤5ppm 4. water content≤0.1% 5. acid value≤0.15mgKOH/g
Applying procedure
1. Weigh certain amount of initiator and the catalyst. The catalyst's amount is generally 30ppm relative to the product (it mainly refers to N220 with 2 hydroxyl groups and N330 with 3 hydroxyl groups). The amount of the catalyst can reduce if the molecular weight of products are relatively high, e.g. for N240, the amount can be 20～25ppm. 2. The mixture is stirred and is stripped under a vacuum with pressure less than l0 mm (Hg), and is heated to 130~145℃ to remove traces of water from the starter. Generally it needs more than 40min after the temperature rises to 130~145℃. 3. Propylene oxide (PO) or mixture of ethylene oxide (EO) and PO is fed to the reactor, under a pressure of 0.1—0.25Mpa. Additional PO or PO and EO is not added until an accelerated pressure drop occurs in the reactor (temperature can reach above 180℃,but this can not harm the activity of DMC or the properties of products). PO or PO and EO is added while maintaining a reactor pressure generally less than 0.1Mpa,temperature 140±10℃. 4. After PO or PO and EO addition is complete, the mixture is held at 140±5℃ until a constant pressure is observed. Residual unreacted monomer (generally only traces) is then stripped.
January 26, 2024In recent years, the demand for bio-based chemicals and sustainable production processes has been steadily increasing. As the world becomes more conscious about environmental preservation, the focus o...view
September 24, 2020China is rich in licorice resources, of which licorice accounts for 7% to 10% of licorice, and licorice accounts for about 5.5% to 9.0%. Licorice extract can be obtained by solvent extraction, and fur...view
August 22, 2024Acrylic acid, also known as hydroxyacetic acid or glycolic acid, is an important organic compound with a wide range of applications. It plays a significant role in various fields such as industrial ma...view
July 20, 2021The use of paraffin wax is very extensive. After immersing the paper in paraffin wax, various wax papers with good waterproof performance can be prepared, which can be used in food, medicine and other...view
October 9, 2021Potassium iodide is a colorless cube crystal, in the form of particles or powders, and it has deliquescence so when it is exposed to the air for a long time, iodine will dissociate and turn to yellow....view
Related Products
Vinyltrimethoxysilane
Product Name: VinyltrimethoxysilaneChemical Formula: C5H12O3SiCAS No.: 2768-02-7Dangerous Grade: III Flammable LiquidTechnical Data of VinyltrimethoxysilaneITEMSSPECIFICATIONAppearanceColorless tran...
