Nanjing Chemical Material Corp.
Service
Products

The Emergency Treatment of Methyl Iodide The Emergency Treatment of Methyl Iodide

Table of Content [Hide]

    What protective measures should be taken during the use of methyl iodide cas? What should we do if the leakage happens by accident? The answers are as follows:

     

    I. The emergency treatment of leakage

     

    Evacuate the personnel from the contaminated area to the safety zone, isolate the contaminated area for 150 meters immediately, and strictly restrict the access. Cut off the fire. It is recommended that emergency personnel wear self-contained positive pressure respirators and protective clothing. Do not contact with the leakage source directly. Cut off the source of leakage as far as possible to prevent it from entering restricted spaces such as sewers and flood discharge trenches.

     

    Small amount of leakage: mix it with sand, dry lime or soda ash.

     

    Large amount of leakage: build a dike or dig a hole for shelter. Cover the leakage with foam to reduce steam hazards. Then transfer it to a tank car or special collector with a explosion-proof pump for recycling or transporting it to a waste disposal site for treatment.

     

    II. Protective measures

     

    The protection of respiratory system: when the methyl iodide cas concentration in the air exceeds the standard, you should choose to wear self-priming filter type respirators (half mask).

     

    The protection of eyes: wear chemical safety goggles.

     

    The protection of bodies: wear breathable protective clothing.


    The protection of hands: wear chemical-proof gloves.

     

    Others: no smoking, eating or drinking at work sites. After work, take a bath and put on clean clothes. Store clothes contaminated with poisons separately, and wash them for standby application. Pay attention to personal cleanliness and hygiene.


    III. First aid measures

     

    Skin contact: remove contaminated clothing and rinse the skin thoroughly with soapy water and clear water. Go to a doctor.

     

    Eye contact: lift eyelids and rinse the eyes thoroughly with plenty of flowing water or normal saline for at least 15 minutes. Go to a doctor.

     

    Inhalation: quickly leave the site to places with fresh air. Keep your respiratory tract unobstructed. Give oxygen if it is difficult to breathe. Give artificial respiration immediately if the breathing stops. Go to a doctor.

     

    Ingestion: drink enough warm water, promote emesis, and seek medical advice.

     

    Extinguishing method: firefighters must wear gas masks and full-body firefighter uniforms.

     

    Fire extinguishing agents: spray water, foam, carbon dioxide and sand.


    References
    Related News
    • The Application of N-octyltriethoxysilane as the Impregnant

      The Application of N-octyltriethoxysilane as the Impregnant

      April 21, 2021N-octyltriethoxysilane is a kind of medium-chain alkyl silane with a monomolecular structure. It is a kind of colorless and transparent liquid that can be soluble in ordinary non-polar organic solvent...view
    • Sustainable Approaches to Utilizing 1,2-Epoxybutane

      Sustainable Approaches to Utilizing 1,2-Epoxybutane

      January 26, 2024In recent years, there has been a growing concern about the environmental impact of various industries. As a result, many companies are now exploring sustainable approaches in their production process...view
    • Uses of Propionyl Chloride

      Uses of Propionyl Chloride

      May 17, 2021Propionyl chloride is a colourless to light yellow transparent liquid with a pungent odour, is soluble in water and ethanol and is violently decomposed. It is used for the following purposes:Applicati...view
    • New Food Additive: Calcium Propionate

      New Food Additive: Calcium Propionate

      August 22, 2024What Is Calcium Propionate?Calcium propionate is a new type of food additive, approved by the World Health Organization (WHO) and the Food and Agriculture Organization of the United Nations (FAO) as a...view
    • Lubricant Additive

      Lubricant Additive

      October 13, 2021The concept of a lubricant additive is the addition of one or more compounds to a lubricant in order to give the lubricant some new properties or improve some existing properties of the lubricant. Add...view
    • Christmas Day

      Christmas Day

      May 19, 2022The end of year is approaching.The last surprise of 2021 also follows (NoNoNo, it should not be the last one, and more heavyweight surprises are about to kick off).Today's surprise: let's start the wo...view
    • TEL:+86-25-52337978
    • EMAIL: info@njchm.com
    • ADDRESS:12/F, Block B, Technology and Innovation Building, Nanjing University of Technology, No.5 New Model Road, Nanjing 210009, China